Segamat Bikers
  • Look Up The Road
  • Security
    • XENA >
      • Disc-Lock Alarms
      • Disc-Locks
      • Accessories
      • Zone Alarms
    • Grip-Lock
    • HELMETLOK
  • Protection
  • Luggage System & Apparel
    • Giant Loop
    • ROK Straps
    • RACER
  • Tire Cares
    • MotoPressor
    • Dynaplug
  • Other Good Stuffs
    • FuelFriend
    • Motografix
    • Cyclewipes
  • Dealers
  • Store
  • Contact
  • News
Picture
Picture
The HELMETLOK™ , designed by Australian firm Rocky Creek Designs, is a simple and affordable system for locking your helmet to your motorcycle.

Small and compact enough to fit in your pocket, jacket or on a belt loop, HELMETLOK™ is designed to lock your helmet to your bike.  Simply open the lock, slip the carabiner through your helmets D-Shackle, attach it to you bike and lock it!  HELMETLOK™ will fit around your handlebar, frame, gear rack, pillion grab rail, pillion foot peg bracket, brake or clutch cables, in fact it will fit around anything with a 1.5" or 38mm diameter. This HELMETLOK™ will easily fit around the fattest Harley or Metric cruiser bars!

The HELMETLOK™ is made from light weight aluminium and the 4 digit (re-settable) locking mechanism from zinc alloy.  To protect your bike, the HELMETLOK™ is covered with a TPE (Thermoplastic elastomer) coating which is 100% recyclable.

Don’t be weighed down carrying your helmet around anymore! Use the simple-to-operate HELMETLOK™ to secure your helmet to any part of your bike.  Enjoy the security and freedom of HELMETLOK™.

Picture
Lock it, don’t lose it!

▪ Locks your helmet to your bike;
▪ Designed to fit the thickest motorcycle bar or frame;
▪ 4 digit reprogrammable combination lock;
▪ All new rubber coating to protect precious paint;
▪ Portable – can be used on any bike;
▪ Made from aluminium and zinc alloy – won’t rust.

Picture
Cable

The handy little cable is a great accessory for your HELMETLOK™. Slide one end through your jacket sleeve, hook the loops at the end of the cable onto the HELMETLOK™ and attach it to your bike. Alternatively, if your helmet does not have “D” rings, run the cable through your helmet’s chin piece, loop the ends through your HELMETLOK™ and lock it to your bike. Now your Jacket AND Helmet are locked to your bike. When you’re finished, it will recoil back to its original length and will slip easily into your pocket.

▪ 3mm nickel plated steel cable with plastic coating;
▪ Stretches to 183cm;
▪ Load capacity of 100kg;
▪ Thread cable through the jacket sleeve and then slip on the Helmetlok and lock to the bike.

Powered by Create your own unique website with customizable templates.